![]() ![]() ![]() If you see white spots, these indicate wear and that it is time for a new printhead. If after cleaning, the printing quality still hasn’t improved, open the printhead and look at the sensor for damage. If you’re using direct thermal labels that don’t require a ribbon, then using Genuine Zebra direct thermal labels will help ensure your printhead achieves the maximum usage before it needs replacing.Įvidently, with heavy use a printhead will eventually need replacing, however well you look after it. But before deciding to replace your printhead make sure that it has been properly cleaned. ![]() For quality, we would recommend using either Zebra or ARMOR Inkanto ribbons. if it is too narrow, you risk scratching the printhead. It also isn’t cost beneficial to use cheap, poor quality ribbons as you will, in turn, be required to use more pressure and heat to get a good print which creates increased wear on the printhead. If you’re using a ribbon that doesn’t exactly fit the printer, e.g. Additional pressure and heat will only result in increased wear of your printhead meaning that it needs replacing sooner.įinally, to extend the life of your printhead you should ensure that you are using the right ribbons. We would recommend using a printhead cleaning pen each time you use your printer, however you could reduce this to cleaning the printhead each time you change the roll of labels.Īnother technique to extend the life of your printhead is to ensure that you are using the right printer settings. The optimum printer settings that you should be aiming for is the lowest possible temperature and pressure to produce an acceptable printed image. To do this, you simply take the nib of the cleaning pen and run it across the printhead, cleaning the entire area. The best way to clean your printhead is by using a printhead cleaning pen. The first step is that you should be regularly cleaning your printhead, something that many people forget to do. However, there are steps that you can take to prolong the life of your printhead and delay having to purchase a new one. Designed for use with industrial printers.With heavy use, buying a new printhead at some stage will be inevitable.UL/cUL recognized when used with Zebra's Z-Xtreme matte polyester labels.Ideal for use with select paper and matte synthetics in environments with moderate to extreme chemical exposure and exposure to moderate abrasion,. ![]() This video is intended for end-user support purposes only.
0 Comments
Leave a Reply. |